Open WebMail is a webmail system based on the Neomail version 1.14 from Ernie Miller. Open WebMail is targeted on dealing with very big mail folder files in a memory efficient way. It also provides many features to help users to switch from Microsoft Outlook smoothly. FEATURES --------- Open WebMail has the following enhanced features: 1. fast folder access 2. efficient messages movement 3. smaller memory footprint 4. convenient folder and message operation 5. graceful filelock 6. remote SMTP relaying 7. virtual hosting 8. user alias 9. pure virtual user support 10. per user capability configuration 11. various authentication modules 12. pam support 13. full content search 14. strong MIME support (presentation and composing) 15. draft folder support 16. reply with stationery support 17. spelling check support 18. POP3 mail support 19. mail filter support 20. message count preview 21. confirm reading support 22. charset auto conversion 23. calendar with reminder/notification support 24. web disk support 25. persistent running through SpeedyCGI 26. HTTP compression support REQUIREMENT ----------- Apache web server with cgi enabled Perl 5.005 or above CGI.pm-2.74.tar.gz (required) MIME-Base64-2.12.tar.gz (required) libnet-1.0901.tar.gz (required) Text-Iconv-1.2.tar.gz (required) libiconv-1.8.tar.gz (required if system doesn't support iconv) CGI-SpeedyCGI-2.21.tar.gz (optional) Compress-Zlib-1.21.tar.gz (optional) ispell-3.1.20.tar.gz (optional) Quota-1.4.6.tar.gz (optional) Authen-PAM-0.12.tar.gz (optional) ImageMagick-5.5.3.tar.gz (optional) INSTALL REQUIRED PACKAGES ------------------------- First, you have to download required packages from http://openwebmail.com/openwebmail/download/packages/ and copy them to /tmp For CGI.pm do the following: cd /tmp tar -zxvf CGI.pm-2.74.tar.gz cd CGI.pm-2.74 perl Makefile.PL make make install ps: It is reported that Open Webmail will hang in attachment uploading when used with older version of CGI module. We recommend using CGI version 2.74 or above for Open WebMail. To check the version of your CGI module : perl -MCGI -e 'print $CGI::VERSION' For MIME-Base64 do the following: cd /tmp tar -zxvf MIME-Base64-2.12.tar.gz cd MIME-Base64-2.12 perl Makefile.PL make make install ps: Though you may already have the MIME-Base64 perl module, we recommended you install MIME-Base64 module from source. This would enable the XS support in this module which greatly improves the encoding/decoding speed of MIME attachment. For libnet do the following: cd /tmp tar -zxvf libnet-1.0901.tar.gz cd libnet-1.0901 perl Makefile.PL (ans 'no' if asked to update configuration) make make install For Text-Iconv-1.2 do the following: Since Text-Iconv-1.2 is actually a perl interface to the underlying iconv() support, you have to check if iconv() support is available in your system. Please type the following command man iconv If there is no manual page for iconv, your system may not support iconv(). Don't worry, you can have the iconv() support by installing libiconv package. cd /tmp tar -zxvf libiconv-1.8.tar.gz cd libiconv-1.8 ./configure make make install Type 'man iconv' again to make sure the libiconv is successfully installed. Then we start to install the Text-Iconv package cd /tmp tar -zxvf Text-Iconv-1.2.tar.gz cd Text-Iconv-1.2 perl Makefile.PL ps: if your system is FreeBSD, or you just installed libiconv manually, please edit the Makefile.PL and change the LIBS and INC lines to the following before doing 'perl Makefile.PL' 'LIBS' => ['-L/usr/local/lib -liconv'], # e.g., '-lm' 'INC' => '-I /usr/local/include', # e.g., '-I/usr/include/other' make make test ps: If the 'make test' failed, it means you set wrong value for LIBS and INC in Makefile.PL or your iconv support is not complete. You may copy the uty/iconv.pl.fake to iconv.pl to make openwebmail work without iconv support. make install INSTALL OPENWEBMAIL ------------------- The latest released or current version is available at http://openwebmail.com/openwebmail/ If you are using FreeBSD and install apache with pkg_add, then just 1. chmod 4555 /usr/bin/suidperl 2. cd /usr/local/www tar -zxvBpf openwebmail-X.XX.tgz 3. modify /usr/local/www/cgi-bin/openwebmail/etc/openwebmail.conf for your need. 4. execute /usr/local/www/cgi-bin/openwebmail/openwebmail-tool.pl --init ps: If you are using RedHat 7.x (or most Linux) with Apache 1. cd /var/www tar -zxvBpf openwebmail-X.XX.tgz mv data/openwebmail html/ rmdir data 2. cd /var/www/cgi-bin/openwebmail modify auth_unix.pl a. set variable $unix_passwdfile_encrypted to '/etc/shadow' b set variable $unix_passwdmkdb to 'none' 3. modify /var/www/cgi-bin/openwebmail/etc/openwebmail.conf a. set mailspooldir to '/var/spool/mail' b. set ow_htmldir to '/var/www/html/openwebmail' set ow_cgidir to '/var/www/cgi-bin/openwebmail' c. set spellcheck to '/usr/bin/ispell' d. change default_signature for your need e. other changes you want 4. add /var/log/openwebmail.log { postrotate /usr/bin/killall -HUP syslogd endscript } to /etc/logrotate.d/syslog to enable logrotate on openwebmail.log 5. execute /var/www/cgi-bin/openwebmail/openwebmail-tool.pl --init If you are using RedHat 6.2, please use /home/httpd instead of /var/www ps: It is highly recommended to read the doc/RedHat-README.txt(contributed by elitric.AT.yahoo.com) if you are installing Open WebMail on RedHat Linux. ps: Thomas Chung (tchung.AT.openwebmail.org) maintains the rpm for all released and current version of openwebmail, It is available at http://openwebmail.com/openwebmail/download/redhat/rpm/ You can get openwebmail working in 5 minutes with this :) If you are using other UNIX with apache, that is okay Try to find the parent directory of both your data and cgi-bin directory, eg: /usr/local/apache/share, then 1. cd /usr/local/apache/share tar -zxvBpf openwebmail-X.XX.tgz mv data/openwebmail htdocs/ rmdir data 2. modify /usr/local/apache/share/cgi-bin/openwebmail/etc/openwebmail.conf a. set mailspooldir to where your system mail spool is b. set ow_htmldir to '/usr/local/apache/share/htdocs' set ow_cgidir to '/usr/local/apache/share/cgi-bin' c. set spellcheck to '/usr/local/bin/ispell' d. change default_signature for your need e. other changes you want 3. cd /usr/local/apache/share/cgi-bin/openwebmail modify openwebmail*.pl change the #!/usr/bin/suidperl to the location where your suidperl is. modify auth_unix.pl a. set variable $unix_passwdfile_encrypted to '/etc/shadow' b set variable $unix_passwdmkdb to 'none' 4. execute /usr/local/apache/share/cgi-bin/openwebmail/openwebmail-tool.pl --init ps:If you are installing Open WebMail on Solaris, please put 'the path of your openwebmail cgi directory' in the first line of file /etc/openwebmail_path.conf. For example, if the script is located at /usr/local/apache/share/cgi-bin/openwebmail/openwebmail.pl, then the content of /etc/openwebmail_path.conf should be: /usr/local/apache/share/cgi-bin/openwebmail ps: If you are using Apache server 2.0 or later, please edit your Apache Configuration file, replace AddDefaultCharset ISO-8859-1 with AddDefaultCharset off INITIALIZE OPENWEBMAIL ---------------------- In the last step of installing openwebmail, you have done: cd the_directory_of_openwebmail_cgi_scripts ./openwebmail-tool.pl --init This init will create the mapping tables used by openwebmail in the future. If you skip this step, you will not be able to access the openwebmail through web interface. And since perl on various platforms may use different underlying dbm system, the init routine will test them and try to give you some useful suggestions. 1. it checks dbm_ext, dbmopen_ext and dbmopen_haslock options in openwebmail.conf, if they are set to wrong value, you may see output like ------------------------------------------------------------- Please change the following 3 options in openwebmail.conf from dbm_ext .db dbmopen_ext none dbmopen_haslock no to dbm_ext .db dbmopen_ext %dbm_ext% dbmopen_haslock yes ------------------------------------------------------------- 2. it checks if the dbm system uses DB_File.pm by default and will suggest a necessary patch to DN_File.pm, you may see output like ------------------------------------------------------------- Please modify /usr/libdata/perl/5.00503/mach/DB_File.pm by adding $arg[3] = 0666 unless defined $arg[3]; before the following text (about line 247) # make recno in Berkeley DB version 2 work like recno in version 1 ------------------------------------------------------------- Please follow the suggestion or the openwebmail may not work properly. And don't forget to redo './openwebmail-tool.pl --init' after you complete the modification. USING OPENWEBMAIL WITH OTHER SMTP SERVER ---------------------------------------- To make openwebmail use other SMTP server for mail sending, you have to set the option 'smtpserver' in openwebmail.conf. Just change the default value '127.0.0.1' to the name/ip of that SMTP server. Please be sure the SMTP server allows mail relayed from your openwebmail host. FILTER SUPPORT -------------- The mailfilter checks if messages in INBOX folder matches the filters rules defined by user. If matches, move/copy the message to the target folder. If you move a message to the DELETE folder, which means deleting messages from a folder. If you use INBOX as the destination in a filter rule, any message matching this rule will be kept in the INBOX folder and other rules will be ignored. USER QUOTA ---------- The disk space used by webmail, webcalendar or webdisk are counted together as the user quota usage. There are five options can be used to control the user quota in openwebmail.conf.default. You may override the defaults by setting them in openwebmail.conf. 1. quota_module This option is used to choose the quota system for your openwebmail. There are two quota modules available currently. a. quota_unixfs.pl This is the recommended quota module if the openwebmail user is the real unix user and you system has enables the disk quota. It has the minimal overhead. ps:You have to install the Quota-1.4.6.tar.gz to use the module. b. quota_du.pl This is the recommended module only if quota_unixfs.pl could not be used on your system (eg: openwebmail user is not standard unix user or unix quota is not available.), because it uses the 'du -sk' to get the user quota usage. Since running 'du -sk' on a large directory may be quote time consuming, this module will cache the result of the 'du -sk' to avoid too much overhead. The default cache lifetime is 60 seconds and could be changed in quota_du.pl If you set this option to 'none', then no quota system will be used in openwebmail 2. quota_limit This option sets the limit (in kb) for user quota usage. The webmail and webdisk operation is limited to 'delete' if quota is hit. This option does not prevent the operation taking the user over this limit from completing, it simply inhibits further saving of messages or files until the user quota usage is brought down again. ps: The value set in this option is used only if quota module doesn't support quotalimit. ( whose quota_info() routine returns the quotalimit as -1 ) ps: If you use the quota_unixfs.pl as the quota module, please be sure that there is some space between the softlimit and hardlimit (eg:5mb) eg: filesystem quota softlimit=25000, hardlimit=30000 3. quota_threshold Normally, the user quota info will be put in the window title of the browser. But if the user quota usage is more the threshold set by this option, a big quota string will be displayed at the top of webmail and webdisk main menu 4. delmail_ifquotahit Set this option to yes to make openwebmail remove oldest messages from user mail folders automatically in case his quotalimit is hit. the new total size will be cut down to apporximately 90% of option quota_limit 5. delfile_ifquotahit Set this option to yes to make openwebmail remove oldest files from webdisk / automatically in case his quotalimit is hit. the new total size will be cut down to apporximately 90% of option quota_limit ps:The above options are used to control quota of user homedir. if you want to limit the size of user mail spool (the INBOX folder), you have to use the spool_limit option. Please refer to openwebmail.conf.help for more detail. COMMAND TOOL openwebmail-tool.pl -------------------------------- Since mail filtering is activated only in Open WebMail, it means messages will stay in the INBOX until user reads their mail with Open WebMail. So 'finger' or other mail status check utility may give you wrong information since they don't know about the filter. A command tool 'openwebmail-tool.pl' can be used as finger replacement. It does mail filtering before report mail status. Some fingerd allow you to specify the name of finger program by -p option (eg: fingerd on FreeBSD). By changing the parameter to fingerd in /etc/inetd.conf, users can get their mail status from remote host. openwebmail-tool.pl can be also used in crontab to prefetch pop3mail or do folder index verification for users. For example: 59 5 * * * /usr/local/www/cgi-bin/openwebmail/openwebmail-tool.pl -q -a -p -i The above line in crontab will do pop3mail prefetching, mail filtering and folder index verification quietly for all users at 5:59 every morning. If you have enabled the calendar_email_notifyinterval in openwebmail.conf, you will also need to use openwebmail-tool.pl in crontab to check the calendar events for sending the notification emails. For example: 0 */2 * * * /usr/local/www/cgi-bin/openwebmail/openwebmail-tool.pl -q -a -n The above line will use openwebmail-tool.pl to check the calendar events for all users every two hours. Please note we use this frequency because the default value of option calendar_email_notifyinterval is 120 (minute). You have to set the crontab according to your calendar_email_notifyinterval. GLOBAL ADDRESSBOOK, FILTERRULE and CALENDAR -------------------------------------------- Current support for global addressbook/filterrule/calendar is very limited. The administrator has to make a copy of addressbook/filterbook/calendar to the file specified by global_addressbook, global_filterbook or global_calendarbook by himself. ps: An account may be created to maintain the global addressbook/filterbook, for example: 'global' ln -s your_global_addressbook ~global/mail/.address.book ln -s your_global_filterbook ~global/mail/.filter.book ln -s your_global_calendarbook ~global/mail/.calendar.book Please be sure that the global files are writeable by user 'global' and readable by others SPELL CHECK SUPPORT ------------------- To enable the spell check in openwebmail, you have to install the ispell or aspell package. 1. download ispell-3.1.20.tar.gz from http://www.cs.ucla.edu/ficus-members/geoff/ispell.html and install it, or you can install binary from FreeBSD package or Linux rpm ps: if you are compiling ispell from source, you may enhance your ispell by using a better dictionary source. a. download http://openwebmail.com/openwebmail/download/contrib/words.gz b. gzip -d words.gz c. mkdir /usr/dict; cp words /usr/dict/words d. start to make your ispell by reading README 2. check the openwebmail.conf to see if spellcheck is pointed to the ispell binary 3. If you have installed multiple dictionaries for your ispell/aspell, you may put them in option spellcheck_dictionaries in openwebmail.conf and these dictionary names should be separated with comma. ps: To know if a specific dictionary is successfully installed on your system, you can do a test with following command ispell -d dictionaryname -a 4. If the language used by a dictionary has a different character set than English, you have to define the characters in %dictionary_letters in the openwebmail-spell.pl for that dictionary. AUTOREPLY SUPPORT ----------------- The auto reply function in Open WebMail is done with the vacation utility. Since vacation utility is not available on some unix, a perl version of vacation utility 'vacation.pl' is distributed with openwebmail. This vacation.pl has the same syntax as the one on Solaris. If the autoreply doesn't work on your system, you can do debug with the -d option 1. choose a user, enable his autoreply in openwebmail user preference 2. edit the ~user/.forward file, add the '-d' option after vacation.pl 3. send a message to this user to test the autoreply 4. check the /tmp/vacation.debug for possible error information WEBDISK SUPPORT --------------- The webdisk module provides a web interface for user to use his home directory as a virtual disk on the web. It is also designed as a storage of the mail attachments, you can freely copy attachments between mail messages and the webdisk. The / of the virtual disk is mapped to the user's home directory, any item displayed in the virtual disk is actually located under the user home directory. Webdisk supports basic file operation (mkdir, rmdir, copy, move, rm), file upload and download (multiple files or directories download is supported, webdisk compresses them into a zip stream on the fly when transmitting). It can also handle many types of archives, including zip, arj, rar, tar.gz, tar.bz, tar.bz2, tgz, tbz, gz, z... Obviously, WebDisk have to call external program to provide all the above features, it finds the external programs in /usr/local/bin, /usr/bin and /bin respectively. the external programs used by webdisk are: basic file uty - cp, mv, rm, file compression/decompression - gzip, bzip2, archive uty - tar, zip, unzip, unrar, unarj, lha image thumbnail uty - convert (in ImageMagick package) ps: You don't have to install all external programs to use WebDisk, a feature will be disabled if related external program is not available. External commands are invoked with exec() and parameters are passed by array, which prevents using /bin/sh for shell escaped character interpretation and thus is quite secure. To limit the WebDisk space used by the user, please refer to the 'USER QUOTA' section VIRTUAL HOSTING --------------- You can have as many virtual domains as you want on same server with only one copy of openwebmail installed. Open Webmail supports per domain config file. Each domain can have its own set of configuration options, including domainname, authentication module, quota limit, mailspooldir ... You can even setup mail accounts for users without creating real unix accounts for them. Please refer to Kevin Ellis's webpage: "How to setup virtual users on Open WebMail using Postfix & vm-pop3d" (http://www.bluelavalamp.net/owmvirtual/) eg: To create configuration file for virtualdomain 'sr1.domain.com' 1. cd cgi-bin/openwebmail/etc/sites.conf/ 2. cp ../openwebmail.conf sr1.domain.com 3. edit options in file 'sr1.domain.com' for domain 'vr1.domain.com' USER ALIAS MAPPING ------------------ Open Webmail can use the sendmail virtusertable for user alias mapping. The loginname typed by user may be pure name or name@somedomain. And this loginname can be mapped to another pure name or name@otherdomain in the virtusertable. This gives you the great flexibility in account management. Please refer to http://www.sendmail.org/virtual-hosting.html for more detail When a user logins Open WebMail with a loginname, this loginname will be checked in the following order: if (loginname is in the form of 'someone@somedomain') { user=someone domain=somedomain } else { # a purename user=loginname domain=HTTP_HOST # hostname in url } is user@domain a virtualuser defined in virtusertable? if not { if (domain is mail.somedomain) { is user@somedomain defined in virtusertable? } else { is user@mail.domain defined in virtusertable? } } if (no mapping found && loginname is pure name) { is loginname a virtualuser defined in virtusertable? } if (any mapping found) { if (mappedname is in the form of 'mappedone@mappeddomain') { user=mappedone domain=mappeddomain } else { user=mappedname domain=HTTP_HOST } } if (option auth_withdomain is on) { check_userpassword for user@domain } else { if (domain == HTTP_HOST) { check_userpassword for user } else { user not found! } } ps: if any alias found in virtusertable, the alias will be used as default email address for user Here is an example of /etc/virtusertable projectmanager pm johnson@company1.com john1 tom@company1.com tom1 tom@company2.com tom2 mary@company3.com mary3 Assume the url of the webmail server is http://mail.company1.com/.... The above virtusertable means: 1. if a user logins as projectmanager, openwebmail checks projectmanager@mail.company1.com projectmanager@company1.com projectmanager as virtualuser ---> pm 2. if a user logins as johnson@company1.com openwebmail checks johnson@company1.com ---> john1 if a user logins as johnson, openwebmail checks johnson@mail.company1.com johnson@company1.com ---> john1 3. if a user logins as tom@company1.com, openwebmail checks tom@company1.com ---> tom1 if a user logins as tom@company2.com, openwebmail checks tom@company2.com ---> tom2 if a user logins as tom, openwebmail checks tom@mail.company1.com tom@company1.com ---> tom1 4. if a user logins as mary, openwebmail checks mary@mail.company1.com mary@company1.com mary as virtualuser ---> not an alias PURE VIRTUAL USER SUPPORT ------------------------- Pure virtual user means a mail user who can use pop3 or openwebmail to access his mails on the mail server but actually has no unix account on the server. Openwebmail pure virtual user support is currently available for system running vm-pop3d + postfix. The authentication module auth_vdomain.pl is designed for this purpose. Openwebmail also provides the web interface which can be used to manage(add/delete/edit) these virtual users under various virtual domains. Please refer to the description in auth_vdomain.pl for more detail. ps: vm-pop3d : http://www.reedmedia.net/software/virtualmail-pop3d/ PostFix : http://www.postfix.org/ Kevin L. Ellis (kevin.AT.bluelavalamp.net) has written a tutorial for openwebmail + vm-pop3d + postfix Iis available at http://www.bluelavalamp.net/owmvirtual/ PER USER CAPABILITY CONFIGURATION --------------------------------- While options in system config file(openwebmail.conf) are applied to all users, you may find it useful to set the options on per user basis sometimes. For example, you may want to limit the client ip access for some users or limit the domain which the user can sent to. This could be easily done with the per user config file support in Open Webmail. The user capability file is located in cgi-bin/openwebmail/etc/user.conf/ and named as the realusername of user. Options in this file are actually a subset of options in openwebmail.conf. An example 'SAMPLE' is provided. eg: To creat the capability file for user 'guest': 1. cd cgi-bin/openwebmail/etc/users.conf/ 2. cp SAMPLE guest 3. edit options in file 'guest' for user guest ps: Openwebmail loads configuration files in the following order 1. cgi-bin/openwebmail/etc/openwebmail.conf.default 2. cgi-bin/openwebmail/etc/openwebmail.conf 3. cgi-bin/openwebmail/etc/sites.conf/domainname if file exists a. authentication module is loaded b. user alias is mapped to real userid. c. userid is authenticated. 4. cgi-bin/openwebmail/etc/users.conf/username if file exists Options set in the later files will override the previous ones PAM SUPPORT ----------- PAM (Pluggable Authentication Modules) provides a flexible mechanism for authenticating users. More detail is available at Linux-PAM webpage. http://www.kernel.org/pub/linux/libs/pam/ Solaris 2.6, Linux and FreeBSD 3.1 are known to support PAM. To make Open WebMail use the support of PAM, you have to: 1. download the Perl Authen::PAM module (Authen-PAM-0.12.tar.gz) It is available at http://www.cs.kuleuven.ac.be/~pelov/pam/ 2. cd /tmp tar -zxvf Authen-PAM-0.12.tar.gz cd Authen-PAM-0.12 perl Makefile.PL make make install ps: Doing 'make test' is recommended when making the Authen::PAM, if you encounter error in 'make test', the PAM on your system will probable-ly not work. 3. add the following 3 lines to your /etc/pam.conf (on Solaris) openwebmail auth required /usr/lib/security/pam_unix.so.1 openwebmail account required /usr/lib/security/pam_unix.so.1 openwebmail password required /usr/lib/security/pam_unix.so.1 (on Linux) openwebmail auth required /lib/security/pam_unix.so openwebmail account required /lib/security/pam_unix.so openwebmail password required /lib/security/pam_unix.so (on Linux without /etc/pam.conf, by protech.AT.protech.net.tw) If you don't have /etc/pam.conf but the directory /etc/pam.d/, please create a file /etc/pam.d/openwebmail with the following content auth required /lib/security/pam_unix.so account required /lib/security/pam_unix.so password required /lib/security/pam_unix.so (on FreeBSD) openwebmail auth required /usr/lib/pam_unix.so openwebmail account required /usr/lib/pam_unix.so openwebmail password required /usr/lib/pam_unix.so ps: PAM support on some release of FreeBSD seems broken (eg:4.1) 4. change auth_module to 'auth_pam.pl' in the openwebmail.conf 5. check auth_pam.pl for further modification required for your system. ps: Since the authentication module is loaded only once in persistent mode, you need to do 'touch openwebmail*pl' to make the modification active. To avoid this, you may change your openwebmail backto suid perl mode before you make the modifications. ps: For more detail about PAM configuration, it is recommended to read "The Linux-PAM System Administrators' Guide" http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/pam.html by Andrew G. Morgan, morgan.AT.kernel.org ADD NEW AUTHENTICATION MODULE TO OPENWEBMAIL -------------------------------------------- Various authentications are directly available for openwebmail, including auth_ldap.pl auth_mysql.pl auth_mysql_vmail.pl auth_pam.pl auth_pam_cobalt.pl auth_pg.pl auth_pgsql.pl auth_pop3.pl auth_unix.pl auth_unix_cobalt.pl auth_vdomain.pl In case you found these modules not suitable for your need, you may write a new authentication module for your own. To add new authentication module into openwebmail, you have to: 1. choose an abbreviation name for this new authentication, eg: xyz 2. declare the package name in the first line of file auth_xyz.pl package openwebmail::auth_xyz; 3. implement the following 4 function: ($retcode, $errmsg, $realname, $uid, $gid, $homedir)= get_userinfo($r_config, $domain, $user); ($retcode, $errmsg, @userlist)= get_userlist($r_config, $domain); ($retcode, $errmsg)= check_userpassword($r_config, $domain, $user, $password); ($retcode, $errmsg)= change_userpassword($r_config, $domain, $user, $oldpassword, $newpassword); where $retcode means: -1 : function not supported -2 : parameter format error -3 : authentication system internal error -4 : username/password incorrect $errmsg is the message to be logged to openwebmail log file, this would ease the work for sysadm in debugging problem of openwebmail $r_config is the reference of the openwebmail %config, you may just leave it untouched ps: You may refer to auth_unix.pl or auth_pam.pl to start. And please read doc/auth_module.txt 4. modify option auth_module in openwebmail.conf to auth_xyz.pl 5. test your new authentication module :) ps: If you wish your authentication module to be included in the next release of openwebmail, please submit it to openwebmail.AT.turtle.ee.ncku.edu.tw. ps: Since the authentication module is loaded only once in persistent mode, you need to do 'touch openwebmail*pl' to make the modification active. To avoid this, you may change your openwebmail backto suid perl mode before you make the modifications. ADD SUPPORT FOR NEW LANGUAGE ----------------------------- It is very simple to add support for your language into openwebmail 1. choose an abbreviation for your language, eg: xy ps: You may choose the abbreviation by referencing the following url http://babel.alis.com/langues/iso639.en.htm http://www.unicode.org/unicode/onlinedat/languages.html http://www.w3.org/International/O-charset.html 2. cd cgi-bin/openwebmail/etc. cp lang/en lang/xy cp -R templates/en templates/xy 3. translate file lang/xy and templates/xy/* from English to your language 4. change the package name of you language file (in the first line) package openwebmail::xy 5. add the name and charset of your language to %languagenames, %languagecharsets in ow-shared.pl, then set default_language to 'xy' in openwebmail.conf 6. check iconv.pl, if the charset is not listed, add a line for this charset in both %charset_localname and %charset_convlist. 7. translate the files used by HTML editor cd data/openwebmail/javascript/htmlarea.openwebmail/popups cd xy then translate htmlarea-lang.js, insert_image.html, insert_sound.html, insert_table.html and select_color.html into language xy Some style sheel setting in insert*html may need to be adjusted to get the best layout for your language. They are a. the width and height of the pop window, defined in the first line b. the boxies for fieldsets, defined in middle of the file .fl { width: 9em; float: left; padding: 2px 5px; text-align: right; } .fr { width: 6em; float: left; padding: 2px 5px; text-align: right; } .fl is for box in the left and .fr is for box in the right, you may try wider width for better layout 8. If you want, you may create the holidays of your language with the openwebmail calendar, then copy the ~/mail/.calendar.book into etc/holidaysdir/your_languagename. Them the holidays will be displayed to all users of this language 9. If you want, you may also translation help tutorial to your language the help files are located under data/openwebmail/help. ps: if your language is Right-To-Left oriented and you can read Arabic, you can use the Arabic template instead of English as the start templates. And don't forget to mention it when you submit the templates to the openwebmail team. ps: Since the language and templates are loaded only once in persistent mode, you need to do 'touch openwebmail*pl' to make the modification active. To avoid this, you may change your openwebmail backto suid perl mode before you make the modifications. ps: If you wish your translation to be included in the next release of openwebmail, please submit it to openwebmail.AT.turtle.ee.ncku.edu.tw. IMPORTANT!!! Please be sure your translation is based on the template files in the latest openwebmail-current.tgz. And please send both your tranlsation and english version files it based on to us. So we can check if there is any latest modification should be added your translation. ADD NEW CHARSET TO AUTO CONVERSION LIST --------------------------------------- Openwebmail can do charset conversion automatically if a message is written with charset other than the one you are using. Openwebmail does this by calling the iconv() charset conversion function, as defined by the Single UNIX Specification. To make openwebmail do auto-convert a new charset for your language: 1. find the charset used by your language in %charset_convlist in charset_iconv.pl 2. put this new charset to the convlist of the charset of your language 3. define the localname of the new charset on your OS to the %charset_localname. (It is always the same as the name of charset but in capitals.) Note: The possible conversions and the quality of the conversions depend on the available iconv conversion tables and algorithms, which are in most cases supplied by the operating system vendor. ADD MORE BACKGROUNDS TO OPENWEBMAIL ----------------------------------- If you would like to add some background images into openwebmail for your user, you can copy them into %ow_htmldir%/images/backgrounds. Then the user can choose these backgrounds from user preference menu. ps: If you wish to share your wonderful backgrounds with others, please email it to openwebmail.AT.turtle.ee.ncku.edu.tw DESIGN YOUR OWN ICONSET IN OPENWEBMAIL --------------------------------------- If you are interested in designing your own image iconset in the openwebmail, you have to 1. create a new sub directory in the %ow_htmldir%/images/iconsets/, eg: MyIconSet ps: %ow_htmldir% is the dir where openwebmail could find its html objects, it is defined in openwebmail.conf 2. copy all images from %ow_htmldir%/images/iconsets/Default to MyIconSet 3. modify the image files in the %ow_htmldir%/images/iconsets/MyIconSet for your need ps:In case you want to design iconsets with text inside, the default font used in Default.English and Cool3D.English is 'Arial Narrow'. If you are interested in designing your own text iconset in the openwebmail, you have to 1. create a new sub directory started with Text. in the %ow_htmldir%/images/iconsets/, eg: Text.MyLang ps: %ow_htmldir% is the dir where openwebmail could find its html objects, it is defined in openwebmail.conf 2. copy %ow_htmldir%/images/iconsets/Text.English/icontext to Text.MyLnag/icontext 3. modify the Text.MyLang/icontext for your language ps: If your are going to make Cool3D iconset for your language with Photoshop, you may start with the psd file created by Jan Bilik , it could save some of your time. The psd file is available at http://openwebmail.com/openwebmail/contrib/Cool3D.iconset.Photoshop.template.zip ps: If you wish the your new iconset to be included in the next release of openwebmail, please submit it to openwebmail.AT.turtle.ee.ncku.edu.tw TEST ----- 1. chdir to openwebmail cgi dir (eg: /usr/local/www/cgi-bin/openwebmail) and check the owner, group and permission of the following files ~/openwebmail*.pl - owner=root, group=mail, mode=4755 ~/vacation.pl - owner=root, group=mail, mode=0755 ~/etc - owner=root, group=mail, mode=755 ~/etc/sessions - owner=root, group=mail, mode=770 ~/etc/users - owner=root, group=mail, mode=770 /var/log/openwebmail.log - owner=root, group=mail, mode=660 2. test your webmail with http://your_server/cgi-bin/openwebmail/openwebmail.pl If there is any problem, please check the faq.txt. The latest version of FAQ will be available at http://openwebmail.com/openwebmail/download/doc/faq.txt PERSISTENT RUNNING through SpeedyCGI ------------------------------------ SpeedyCGI: http://www.daemoninc.com/SpeedyCGI/ "SpeedyCGI is a way to run perl scripts persistently, which can make them run much more quickly." Openwebmail can get almost 5x to 10x speedup when running with SpeedyCGI. You can get a quite reactive openwebmail systems on a very old P133 machine :) Note: Don't try to fly before you can walk... Please do this speedup modification only after your openwebmail is working. 1. install SpeedyCGI get the latest SpeedyCGI source from http://sourceforge.net/project/showfiles.php?group_id=2208 http://daemoninc.com/SpeedyCGI/CGI-SpeedyCGI-2.21.tar.gz cd /tmp tar -zxvf path_to_source/CGI-SpeedyCGI-2.21.tar.gz cd CGI-SpeedyCGI-2.21 perl Makefile.PL (ans 'no' with the default) then edit speedy/Makefile and add " -DIAMSUID" to the end of the line of "DEFINE = " (Now, please check the end of this paragraph to see if any modification to the source is required for your platform) make make install (If you encounter error complaining about install mod_speedy, that is okay, you can safely ignore it.) ps:To make SpeedyCGI works with setuid scripts on Solaris, you have to apply the following temporary fix. This fix is provide by Sam Horrocks, author of SpeedyCGI :) open src/speedy_backend_main.c goto the main() function (about line 168) find the following block (about line 179-184) /* Close off all I/O except for stderr (close it later) */ for (i = 32; i >= 0; --i) { if (i != 2 && i != PREF_FD_LISTENER) (void) close(i); } move the block down below the speedy_perl_init(); (after line 201) ps:If you have problem to compile SpeedyCGI on RedHat9, please adding the following lines to the top of src/speedy_perl.c: #ifndef setdefout # define setdefout(a) Perl_setdefout(aTHX_ a) #endif Thanks to Douglas, Joshua, jdouglas.AT.enterasys.com ps:Since the /usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE/libperl.so on RedHat9 seems buggy, you may need to replace it with the RedHat8 libperl.so to make openwebmail + speedycgi work properly. The RedHat8 libperl.so is available at http://openwebmail.com/openwebmail/download/packages/libperl.so.redhat8.gz ps:If you are compiling SpeedyCGI on FreeBSD 5.0 or above, please apply the following patch or you may get 'segmentation fault'. --------------------------------------------------------------- --- src/speedy_opt.c Mon Sep 30 07:19:54 2002 +++ /tmp/speedy_opt.c Tue May 20 11:11:28 2003 @@ -165,6 +165,8 @@ static void cmdline_split( ++p; if (*p) strlist_append(doing_speedy_opts ? speedy_opts : perl_args, *p); + else + break; } if (*p) { @@ -422,7 +424,7 @@ const char * const *speedy_opt_script_ar } SPEEDY_INLINE const char *speedy_opt_script_fname(void) { - return exec_argv.ptrs[script_argv_loc]; + return exec_argv.len > script_argv_loc ? exec_argv.ptrs[script_argv_loc] : NULL; } #ifdef SPEEDY_BACKEND --------------------------------------------------------------- Thanks to Lars Thegler, lars.AT.thegler.dk 2. set speedy to setuid root Find the speedy binary according to the messages in previous step, it is possible-ly at /usr/bin/speedy or /usr/local/bin/speedy. Assume it is installed in /usr/bin/speedy cp /usr/bin/speedy /usr/bin/speedy_suid chmod 4555 /usr/bin/speedy_suid 3. modify openwebmail for speedy The code of openwebmail has already been modified to work with SpeedyCGI, so all you have to do is to replace the first line of all cgi-bin/openwebmail/openwebmail*pl from #!/usr/bin/suidperl -T to #!/usr/bin/speedy_suid -T -- -T/tmp/speedy The first -T option (before --) is for perl interpreter. The second -T/tmp/speedy option is for SpeedyCGI system, which means the prefix of temporary files used by SpeedyCGI. ps: You will see a lot of /tmp/speedy.number files if your system is quite busy, so you may change this to value like /var/run/speedy 4. test you openwebmail for the speedup. 5. If you are installing openwebmail on a low end machine, then you may wish to eliminate the firsttime startup delay of the scripts for the user. You may use the preload.pl, it acts as a http client to start openwebmail on the web server automatically. a. through web interface http://your_server/cgi-bin/openwebmail/preload.pl Please refer to preload.pl for default password and how to change it. b. through command line or you can put the following line in crontab to preload the most frequently used scripts into mempry 0 * * * * /usr/local/www/cgi-bin/openwebmail/preload.pl -q openwebmail.pl openwebmail-main.pl openwebmail-read.pl If your machine has a lot of memory, you may choose to preload all openwebmail scripts 0 * * * * /usr/local/www/cgi-bin/openwebmail/preload.pl -q --all 6. Need more speedup? Yes, you can try to install the mod_speedycgi to your Apache, but you may need to recompile Apache to make it allow using root as euid Please refer to README in SpeedyCGI source tar ball.. Another approach for speedup is to use some httpd that handles muliples connections with only one process, eg: http://www.acme.com/software/thttpd/, instead of the apache web server. Please refer to doc/thttpd.txt for some installation tips. ps: Kevin L. Ellis (kevin.AT.bluelavalamp.net) has written a tutorial and benchmark for OWM + SpeedyCGI. It is available at http://www.bluelavalamp.net/owmspeedycgi/ HTTP COMPRESSION ---------------- To make this feature work, you have to install the Compress-Zlib-1.21.tar.gz. HTTP Compression is very useful for users with slow connection to the openwebmail server (eg: dialup user, PDA user). Note: There are some compatibility issues for HTTP compression 1. Some proxy servers only support HTTP compression via HTTP 1.1, the user have to enable the use of HTTP1.1 for proxy in their browser 2. Some proxy servers don't support HTTP compression at all, the user have to list the webmail server as directly connected in the advanced proxy setting in their browser 3. Some browsers have problems when using HTTP compression with SSL, 4. Some browsers claim to support HTTP compression but actually not. The login screen has a checkbox for HTTP compression. So in case there is any problem, the user can relogin with checkbox unchecked. TODO ---- Features that we would like to implement first... 1. web bookmark 2. PGP/GNUPG integration 3. shared folder/calendar Features that people may also be interested 1. maildir support 2. online people sign in 3. log analyzer 03/23/2003 openwebmail.AT.turtle.ee.ncku.edu.tw